The post Manufacturing and Services seen pointing to resilience appeared on BitcoinEthereumNews.com. S&P Global will release on Friday the November flash Purchasing Managers’ Indices (PMIs) for most major economies, including the United States (US). These surveys of top private sector executives provide an early indication of the business sector’s economic health. Market participants anticipate that the Global Services PMI will print at 54.8, matching the October reading, while Global Manufacturing output is expected to print at 52, slightly below the 52.5 reading of the previous month. Finally, it is worth noting that the Composite PMI printed at 54.6 in October. The US is coming from the longest government shutdown in its history, which means little macroeconomic data has been released in the last couple of months. Indeed, the country kick-started reporting on Thursday, but offered the September Nonfarm Payrolls (NFP) report, which showed the economy added 119,000 new positions in the month, better than the 50,000 expected. The Unemployment Rate increased to 4.4%, worse than the previous 4.3%, although the Participation Rate increased from 62.3% to 62.4%, partially offsetting the uptick in the unemployment rate. As a result, markets turned optimistic, with the US Dollar (USD) under mild near-term selling pressure. Still, the market’s hunger for economic-related data ahead of the Federal Reserve (Fed) December monetary policy meeting could see the S&P Global PMIs having a wider-than-usual impact on the US Dollar (USD). S&P Global separately reports manufacturing activity and services activity through the Manufacturing PMI and the Services PMI. Additionally, they present a weighted combination of the two, the Composite PMI. Generally speaking, a reading of 50 or more indicates expansion, while below the threshold, the indexes indicate contraction. The report has two versions, a preliminary estimate and a final revision, which comes around two weeks later. These preliminary versions or flash estimates tend to have a broader impact on the… The post Manufacturing and Services seen pointing to resilience appeared on BitcoinEthereumNews.com. S&P Global will release on Friday the November flash Purchasing Managers’ Indices (PMIs) for most major economies, including the United States (US). These surveys of top private sector executives provide an early indication of the business sector’s economic health. Market participants anticipate that the Global Services PMI will print at 54.8, matching the October reading, while Global Manufacturing output is expected to print at 52, slightly below the 52.5 reading of the previous month. Finally, it is worth noting that the Composite PMI printed at 54.6 in October. The US is coming from the longest government shutdown in its history, which means little macroeconomic data has been released in the last couple of months. Indeed, the country kick-started reporting on Thursday, but offered the September Nonfarm Payrolls (NFP) report, which showed the economy added 119,000 new positions in the month, better than the 50,000 expected. The Unemployment Rate increased to 4.4%, worse than the previous 4.3%, although the Participation Rate increased from 62.3% to 62.4%, partially offsetting the uptick in the unemployment rate. As a result, markets turned optimistic, with the US Dollar (USD) under mild near-term selling pressure. Still, the market’s hunger for economic-related data ahead of the Federal Reserve (Fed) December monetary policy meeting could see the S&P Global PMIs having a wider-than-usual impact on the US Dollar (USD). S&P Global separately reports manufacturing activity and services activity through the Manufacturing PMI and the Services PMI. Additionally, they present a weighted combination of the two, the Composite PMI. Generally speaking, a reading of 50 or more indicates expansion, while below the threshold, the indexes indicate contraction. The report has two versions, a preliminary estimate and a final revision, which comes around two weeks later. These preliminary versions or flash estimates tend to have a broader impact on the…

Manufacturing and Services seen pointing to resilience

S&P Global will release on Friday the November flash Purchasing Managers’ Indices (PMIs) for most major economies, including the United States (US). These surveys of top private sector executives provide an early indication of the business sector’s economic health.

Market participants anticipate that the Global Services PMI will print at 54.8, matching the October reading, while Global Manufacturing output is expected to print at 52, slightly below the 52.5 reading of the previous month. Finally, it is worth noting that the Composite PMI printed at 54.6 in October.

The US is coming from the longest government shutdown in its history, which means little macroeconomic data has been released in the last couple of months. Indeed, the country kick-started reporting on Thursday, but offered the September Nonfarm Payrolls (NFP) report, which showed the economy added 119,000 new positions in the month, better than the 50,000 expected. The Unemployment Rate increased to 4.4%, worse than the previous 4.3%, although the Participation Rate increased from 62.3% to 62.4%, partially offsetting the uptick in the unemployment rate. As a result, markets turned optimistic, with the US Dollar (USD) under mild near-term selling pressure.

Still, the market’s hunger for economic-related data ahead of the Federal Reserve (Fed) December monetary policy meeting could see the S&P Global PMIs having a wider-than-usual impact on the US Dollar (USD).

S&P Global separately reports manufacturing activity and services activity through the Manufacturing PMI and the Services PMI. Additionally, they present a weighted combination of the two, the Composite PMI. Generally speaking, a reading of 50 or more indicates expansion, while below the threshold, the indexes indicate contraction.

The report has two versions, a preliminary estimate and a final revision, which comes around two weeks later. These preliminary versions or flash estimates tend to have a broader impact on the US Dollar.

What can we expect from the next S&P Global PMI report?

The anticipated figures, while below the previous ones on the manufacturing sector, still indicate healthy economic progress in the world’s largest economy.

With that in mind, figures in line with expectations will be viewed as positive news, particularly in relation to the Manufacturing PMI. Upbeat numbers could boost the market’s optimism and temporarily weigh on the USD demand, but had no material impact on the upcoming Federal Reserve monetary policy decision, unless the figures are extremely disappointing, an unlikely scenario.

Beyond the headline readings, the reports include sub-indices on employment and inflation, closely watched by market players. In this particular case, the figures could have a more relevant impact than the headline figure, as inflation and employment levels are at the centre of the Fed’s decision. Much worse-than-anticipated data should result in renewed speculation of a Fed cut in December, resulting in a weaker USD across the FX board.

When will the November flash US S&P Global PMIs will be released and how could they affect EUR/USD?

The S&P Global Manufacturing, Services, and Composite PMIs reports will be released at 14:45 GMT on Friday, and as previously noted, are expected to show that US business activity continued to expand in November.

Ahead of the release, the USD is shedding ground against most major rivals amid a risk-on environment following the September NFP report.

Valeria Bednarik, FXStreet Chief Analyst, notes: “The EUR/USD pair bounced modestly from near the 1.1500 level posted early on Thursday, as risk appetite undermines demand for the Greenback in the near-term. On a weekly basis, however, the pair remains on the bearish side.”

Bednarik adds: “Technical readings in the daily chart suggest EUR/USD could extend its slide. A bearish 20 Simple Moving Average (SMA) is currently providing dynamic resistance at around 1.1570, while extending its slide below a flat 100 SMA, usually a sign of mounting selling pressure. At the same time, the Momentum indicator heads nowhere around its midline, in line with the recent absence of directional strength. Support lies at 1.1470 ahead of the 1.1400 region, where the pair met buyers in July. Gains beyond the aforementioned 1.1570 expose the 1.1630 price zone, with additional gains unlikely in the current scenario.”

Fed FAQs

Monetary policy in the US is shaped by the Federal Reserve (Fed). The Fed has two mandates: to achieve price stability and foster full employment. Its primary tool to achieve these goals is by adjusting interest rates.
When prices are rising too quickly and inflation is above the Fed’s 2% target, it raises interest rates, increasing borrowing costs throughout the economy. This results in a stronger US Dollar (USD) as it makes the US a more attractive place for international investors to park their money.
When inflation falls below 2% or the Unemployment Rate is too high, the Fed may lower interest rates to encourage borrowing, which weighs on the Greenback.

The Federal Reserve (Fed) holds eight policy meetings a year, where the Federal Open Market Committee (FOMC) assesses economic conditions and makes monetary policy decisions.
The FOMC is attended by twelve Fed officials – the seven members of the Board of Governors, the president of the Federal Reserve Bank of New York, and four of the remaining eleven regional Reserve Bank presidents, who serve one-year terms on a rotating basis.

In extreme situations, the Federal Reserve may resort to a policy named Quantitative Easing (QE). QE is the process by which the Fed substantially increases the flow of credit in a stuck financial system.
It is a non-standard policy measure used during crises or when inflation is extremely low. It was the Fed’s weapon of choice during the Great Financial Crisis in 2008. It involves the Fed printing more Dollars and using them to buy high grade bonds from financial institutions. QE usually weakens the US Dollar.

Quantitative tightening (QT) is the reverse process of QE, whereby the Federal Reserve stops buying bonds from financial institutions and does not reinvest the principal from the bonds it holds maturing, to purchase new bonds. It is usually positive for the value of the US Dollar.

Economic Indicator

S&P Global Services PMI

The S&P Global Services Purchasing Managers Index (PMI), released on a monthly basis, is a leading indicator gauging business activity in the US services sector. As the services sector dominates a large part of the economy, the Services PMI is an important indicator gauging the state of overall economic conditions. The data is derived from surveys of senior executives at private-sector companies from the services sector. Survey responses reflect the change, if any, in the current month compared to the previous month and can anticipate changing trends in official data series such as Gross Domestic Product (GDP), industrial production, employment and inflation. A reading above 50 indicates that the services economy is generally expanding, a bullish sign for the US Dollar (USD). Meanwhile, a reading below 50 signals that activity among service providers is generally declining, which is seen as bearish for USD.


Read more.

Next release:
Fri Nov 21, 2025 14:45 (Prel)

Frequency:
Monthly

Consensus:
54.8

Previous:
54.8

Source:

S&P Global

Source: https://www.fxstreet.com/news/us-sp-global-pmi-expected-to-show-healthy-business-activity-in-november-202511210900

Market Opportunity
PoP Planet Logo
PoP Planet Price(P)
$0,01798
$0,01798$0,01798
+0,84%
USD
PoP Planet (P) Live Price Chart
Disclaimer: The articles reposted on this site are sourced from public platforms and are provided for informational purposes only. They do not necessarily reflect the views of MEXC. All rights remain with the original authors. If you believe any content infringes on third-party rights, please contact service@support.mexc.com for removal. MEXC makes no guarantees regarding the accuracy, completeness, or timeliness of the content and is not responsible for any actions taken based on the information provided. The content does not constitute financial, legal, or other professional advice, nor should it be considered a recommendation or endorsement by MEXC.

You May Also Like

Fed Decides On Interest Rates Today—Here’s What To Watch For

Fed Decides On Interest Rates Today—Here’s What To Watch For

The post Fed Decides On Interest Rates Today—Here’s What To Watch For appeared on BitcoinEthereumNews.com. Topline The Federal Reserve on Wednesday will conclude a two-day policymaking meeting and release a decision on whether to lower interest rates—following months of pressure and criticism from President Donald Trump—and potentially signal whether additional cuts are on the way. President Donald Trump has urged the central bank to “CUT INTEREST RATES, NOW, AND BIGGER” than they might plan to. Getty Images Key Facts The central bank is poised to cut interest rates by at least a quarter-point, down from the 4.25% to 4.5% range where they have been held since December to between 4% and 4.25%, as Wall Street has placed 100% odds of a rate cut, according to CME’s FedWatch, with higher odds (94%) on a quarter-point cut than a half-point (6%) reduction. Fed governors Christopher Waller and Michelle Bowman, both Trump appointees, voted in July for a quarter-point reduction to rates, and they may dissent again in favor of a large cut alongside Stephen Miran, Trump’s Council of Economic Advisers’ chair, who was sworn in at the meeting’s start on Tuesday. It’s unclear whether other policymakers, including Kansas City Fed President Jeffrey Schmid and St. Louis Fed President Alberto Musalem, will favor larger cuts or opt for no reduction. Fed Chair Jerome Powell said in his Jackson Hole, Wyoming, address last month the central bank would likely consider a looser monetary policy, noting the “shifting balance of risks” on the U.S. economy “may warrant adjusting our policy stance.” David Mericle, an economist for Goldman Sachs, wrote in a note the “key question” for the Fed’s meeting is whether policymakers signal “this is likely the first in a series of consecutive cuts” as the central bank is anticipated to “acknowledge the softening in the labor market,” though they may not “nod to an October cut.” Mericle said he…
Share
BitcoinEthereumNews2025/09/18 00:23
Tokenization Could Disrupt Finance Faster Than Digitization Hit Media, MoonPay President Says

Tokenization Could Disrupt Finance Faster Than Digitization Hit Media, MoonPay President Says

MoonPay president Keith Grossman believes tokenization can disrupt the financial industry faster than digitization disrupted media. He points to major institutions like BlackRock already offering tokenized funds as evidence that transformation is underway.
Share
MEXC NEWS2025/12/22 17:22
Why The Green Bay Packers Must Take The Cleveland Browns Seriously — As Hard As That Might Be

Why The Green Bay Packers Must Take The Cleveland Browns Seriously — As Hard As That Might Be

The post Why The Green Bay Packers Must Take The Cleveland Browns Seriously — As Hard As That Might Be appeared on BitcoinEthereumNews.com. Jordan Love and the Green Bay Packers are off to a 2-0 start. Getty Images The Green Bay Packers are, once again, one of the NFL’s better teams. The Cleveland Browns are, once again, one of the league’s doormats. It’s why unbeaten Green Bay (2-0) is a 8-point favorite at winless Cleveland (0-2) Sunday according to betmgm.com. The money line is also Green Bay -500. Most expect this to be a Packers’ rout, and it very well could be. But Green Bay knows taking anyone in this league for granted can prove costly. “I think if you look at their roster, the paper, who they have on that team, what they can do, they got a lot of talent and things can turn around quickly for them,” Packers safety Xavier McKinney said. “We just got to kind of keep that in mind and know we not just walking into something and they just going to lay down. That’s not what they going to do.” The Browns certainly haven’t laid down on defense. Far from. Cleveland is allowing an NFL-best 191.5 yards per game. The Browns gave up 141 yards to Cincinnati in Week 1, including just seven in the second half, but still lost, 17-16. Cleveland has given up an NFL-best 45.5 rushing yards per game and just 2.1 rushing yards per attempt. “The biggest thing is our defensive line is much, much improved over last year and I think we’ve got back to our personality,” defensive coordinator Jim Schwartz said recently. “When we play our best, our D-line leads us there as our engine.” The Browns rank third in the league in passing defense, allowing just 146.0 yards per game. Cleveland has also gone 30 straight games without allowing a 300-yard passer, the longest active streak in the NFL.…
Share
BitcoinEthereumNews2025/09/18 00:41