Blighter Boosts Stealth of Radars to meet LPI Needs of Mobile Surveillance Platforms

• Blighter radars feature Low-Probability-of-Intercept (LPI) waveforms making the radar signal difficult to detect, this is achieved without compromising the radar’s accuracy and sensitivity in target detection, tracking and classification of people, vehicles, and near-ground airborne threats.
• Developers of crewed and autonomous surveillance vehicles benefit from Blighter radars’ solid-state design and low transmitted power (4 Watts) reducing EMC and acoustic signature; this also enables a smaller safety zone around the radar, aiding sensor integration.

CAMBRIDGE, England, Feb. 4, 2026 /PRNewswire/ — Blighter Surveillance Systems (www.blighter.com), a pioneering designer and manufacturer of ground-based smart electronic-scanning micro-Doppler radars, has further boosted the stealth characteristics of its e-scan radars to better serve the growing number of developers of crewed and autonomous multi-sensor surveillance vehicles and platforms.

According to Blighter, the growing sophistication of electronic counter-countermeasures (ECCM) means that demand for Low-Probability-of-Intercept (LPI) radars is increasing rapidly. The need for covert radars that can see but not be seen is particularly strong in the mobile surveillance market where stealth, information superiority and data security are paramount.

Blighter radars, including its B400 series, feature Low-Probability-of-Intercept (LPI) waveforms; this makes the radar signal difficult to detect and therefore difficult to jam. Radar performance remains exceptional, with Blighter’s industry-leading capability in the detection and classification of people, vehicles, and near-ground airborne threats.  

Mark Radford, co-founder and chief technology officer (CTO) at Blighter says: “Our radars are inherently covert due to the design choices we made at the outset. We were first to market with a solid-state, non-rotating electronic scanning ground radar, and our adoption of the dual antenna FMCW (frequency modulated continuous wave) architecture and the decision to operate in the Ku-band spectrum have led to an exceptionally tough, EMC robust and stealthy radar design.”

Blighter continues to fine-tune its technology to improve detection, tracking and classification of targets while staying covert. For example, new fast scanning modes, featuring sub-second update rates, result in even less radar energy being transmitted in any specific direction. Furthermore, when the radar is used with BlighterNexus‘ ‘Scan-Manager Application Module’, the radar can operate in a Multi-Function Radar (MFR) mode with greater randomisation of the low-power waveforms being transmitted.

“Developers of crewed and autonomous surveillance vehicles and platforms are already benefitting from Blighter’s LPI credentials,” says Mark Radford. “The radar’s solid-state design and extremely low transmit power (4 Watts) reduces the EMC and acoustic signatures and results in a smaller safety zone around the radar to aid sensor integration. But fundamentally, it’s the complexity and length of the combined e-scan, FMCW and Doppler chirp waveforms that make the Blighter radar so difficult to detect and jam.”

In 2025, Blighter radars were integrated into a fleet of custom-built multi-sensor mobile surveillance vehicles for on-the-go monitoring of a European land border; by Allen-Vanguard for its SECURIS rapid deployable counter drone system, and by a SE Asian military customer for mobile border surveillance vehicles.

“Our radar is probably the stealthiest and most resilient ground radar in its class and an excellent fit for developers in the multi-sensor mobile surveillance space,” says Mark Radford. “A great fit for customers wanting to add a covert radar into modernisation programmes, for electric and hybrid autonomous vehicles, as well as for patrol and target designator vehicles.”

What is Low-Probability-of-Intercept (LPI)?
Low-Probability-of-Intercept (LPI) is a radar design concept that emerged at the end of the Cold War as radar engineers sought ways to prevent emissions from being detected by increasingly sensitive electronic support receivers. An LPI radar transmits in a way that makes its emissions extremely difficult for enemy receivers to detect, using low peak power, complex coded waveforms, frequency agility, advanced scan patterns, all combined with high processing gain and very low side lobe antennas to keep energy tightly confined to the main beam. Demand for LPI radars is being driven by a combination of threat evolution, defence modernisation, and rapid advances in radar technology.

Blighter’s non-rotating, solid-state, low SWaP (size, weight and power) electronic scanning radars provide uninterrupted rapid surveillance over a wide area detecting moving vehicles/vessels, persons (including ‘crawlers’) and near ground aerial threats at ranges of up to 32 km. The radars’ compact and modular design enables rapid deployment on towers and vehicles, and as dismounted portable systems on tripods.

How to contact Blighter? For more information about Blighter’s range of electronic scanning radars, please visit www.blighter.com, telephone +44 1223 491122 or email hello@blighter.com.
Get in touch with a member of our team today.

Media Photos: 

• Mark Radford, Blighter CTO
• Blighter’s mobile Ground Surveillance Radars on a Supacat Coyote tactical support vehicle
• Blighter’s A400 aerial threat detection radars on a 6×6 Supacat

About Blighter (www.blighter.com)
Blighter, Cambridge UK, is a world-leading designer and manufacturer of ground-based radars for the surveillance of moving objects on land, along coastlines, and in the air. Using ultra-reliable, low-power, electronic scanning antennas and AI-assisted software, Blighter radars are designed to detect, classify, and track targets including people, vehicles, and near-ground airborne threats at ranges of up to 32 km. Blighter excels at detecting small and covert targets in complex environments thanks to its patented technology and delivers proven, mission critical radars for Defence, Homeland Security, Critical National Infrastructure, and Energy sectors worldwide.

Blighter’s commercial-off-the-shelf (COTS) product portfolio includes 2D, 3D, and 4D radars, and powerful software for the configuration, control, and viewing of multiple radars. Featuring Low-Probability-of-Intercept (LPI) waveforms, Blighter radars are inherently covert and built for robust fixed and mobile operation. Its radars are trusted by the UK Ministry of Defence for forward operating base (FOB) protection, the South Korean Army for border surveillance along the Demilitarised Zone (DMZ), by the United States Air Force for drone detection, by Five Eyes/NATO customers for deployment on their mobile surveillance and armoured vehicles, and the UK’s major airports for perimeter protection. Blighter supports international systems integrators in creating layered, multi-sensor surveillance systems and can facilitate localised manufacture. Over 800 units have been deployed in 40+ countries, making Blighter a trusted partner for surveillance projects worldwide. Blighter is located in Great Chesterford on the outskirts of Cambridge, UK.

View original content:https://www.prnewswire.com/news-releases/blighter-boosts-stealth-of-radars-to-meet-lpi-needs-of-mobile-surveillance-platforms-302678214.html

SOURCE Blighter Surveillance Systems