Buy Crypto Markets Spot FuturesSNOW Earn Event Center Rewards Hub

MEXC offers two types of futures trading: USDT-M futures (forward contracts) and Coin-M futures (inverse contracts). While their calculation principles are similar, there are some differences. Below,MEXC offers two types of futures trading: USDT-M futures (forward contracts) and Coin-M futures (inverse contracts). While their calculation principles are similar, there are some differences. Below,

Learn/Trading Guide/Futures/Margins & P...alculations

Margins & PNL Calculations

Author: MEXC

Jul 16, 2025MEXC

#Basic #Futures #Beginners #Basic Concepts

M$1.0609-6.06%

4$0.008784+2.76%

MEXC offers two types of futures trading: USDT-M futures (forward contracts) and Coin-M futures (inverse contracts). While their calculation principles are similar, there are some differences. Below, this article will provide specific examples and explanations. Please note: the following calculations eschew extremely complex logic in favor of clarity and brevity for margin calculation.

1. Introduction to Margin

In MEXC perpetual futures, a certain amount of margin is required for opening a position. In the process of margin trading, it is crucial to pay attention to the following points:

1.1 Initial Margin

The minimum amount of margin required to open a position. Additionally, the initial margin rate (position value / position margin) also reflects your leverage multiplier.

1.2 Maintenance Margin

The minimum margin requirement to maintain a position. Falling below this ratio will trigger liquidation or partial liquidation.

1.3 Opening Cost

The total assets that must be frozen in order to open a position, including the initial margin and possible trading fees.

2. Margin Calculation

In perpetual futures, margin refers to the order cost required to open a position. The actual trading fee or rebate is ultimately determined by the manner in which the order (type) is executed. (A maker is a liquidity provider, while a taker is a liquidity consumer.)

2.1 USDT-M Futures

Margin Amount = Average Entry Price x Opening Quantity x Futures Size / Leverage Multiplier

2.2 Coin-M Futures

Margin Amount = Opening Quantity x Futures Size / (Leverage Multiplier x Average Entry Price)

2.3 Calculation Example

USDT-M Futures:

If you use 200x leverage and submit a limit order for 10,000 BTC/USDT contracts at a price of 50,000 USDT/BTC, and the futures size is 0.0001 BTC per contract:

Your margin amount = (10,000 contracts x 0.0001 BTC/contract x 50,000 USDT/BTC) / 200x leverage = 250 USDT

Coin-M Futures:

If you use 125x leverage and submit a limit order for 100 BTC/USD contracts at a price of 50,000 USD/BTC, and the futures size is 100 USD per contract:

Your margin amount = 100 contracts x 100 USD / (50,000 USD/BTC x 125x leverage) = 0.0016 BTC

3. PNL Calculation

Your profit and loss (PNL) are influenced by three factors: trading fees, funding fees (income or expenditure), and PNL from closing positions.

3.1 Trading Fees

As a liquidity consumer or taker, you will incur a fee calculated as Position Value x Taker Fee Rate.

As a liquidity provider or maker, you will incur a fee calculated as Position Value x Maker Fee Rate.

3.2 Funding Fee

Depending on the funding rate (positive or negative) and the direction (long or short) of your position, you will either receive or incur funding fees.

Funding Fee = Funding Rate x Position Value.

Position Value = Position Quantity (Tokens) x Fair Price.

3.3 PNL Calculation

3.3.1 Closing PNL

USDT-M Futures:

For long positions: (Close Price - Average Entry Price) x Position Quantity x Size

For short positions: (Average Entry Price - Close Price) x Position Quantity x Size

Coin-M Futures:

For long positions: (1 / Average Entry Price - 1 / Average Close Price) x Position Quantity x Size

For short positions: (1 / Average Close Price - 1 / Average Entry Price) x Position Quantity x Size

3.3.2 Unrealized PNL

USDT-M Futures:

For long positions: (Fair Price - Average Entry Price) x Position Quantity x Size

For short positions: (Average Entry Price - Fair Price) x Position Quantity x Size

Coin-M Futures:

For long positions: (1 / Average Entry Price - 1 / Fair Price) x Position Quantity x Size

For short positions: (1 / Fair Price - 1 / Average Entry Price) x Position Quantity x Size

3.4 Calculation Example

Using USDT-M Futures as an Example:

If you, as a taker, open a long position of 10,000 contracts in the BTC/USDT perpetual futures at a price of 50,000 USDT/BTC:

With Taker Fee Rate = 0.02%, Maker Fee Rate = 0.00%, Funding Rate = -0.025%, and the current market price = 50,000 USDT/BTC, you will incur a trading fee calculated as follows:

50,000 USDT/BTC x 10,000 contracts x 0.0001 BTC/contract x 0.02% = 10 USDT

When the funding rate is negative, you will receive a funding fee calculated as follows:

50,000 USDT/BTC x 10,000 contracts x 0.0001 BTC/contract x (-0.025%) = -12.5 USDT (the funding fee to be received)

Suppose you, as a maker, close 10,000 contracts at a price of 60,000 USDT/BTC:

Closing PNL = (60,000 USDT/BTC - 50,000 USDT/BTC) x 10,000 contracts x 0.0001 BTC/contract = 10,000 USDT

Closing Fee = 60,000 USDT/BTC x 10,000 contracts x 0.0001 BTC/contract x 0.00% = 0 USDT

So, in this scenario, your total realized PNL is calculated as follows:

= Closing PNL - Funding Fee - Taker Fee - Maker Fee

= 10,000 USDT -（- 12.5 USDT）- 10 USDT - 0 USDT

= 10,002.5 USDT

3.5 Reminders

When settling the funding rate, the position value is calculated based on the current fair price.

The calculation results are for reference only, and specific situations should be based on the rules of MEXC futures products.

Tutorials and guides may vary across different operating systems. Please refer to your actual operating system for accurate information.

4. Summary

In MEXC perpetual futures, a certain amount of margin is required for opening a position. The initial margin represents the minimum amount required to open a position, reflecting your leverage multiplier. The maintenance margin is the minimum requirement to keep a position, falling below which may lead to forced liquidation. The opening cost includes the initial margin and potential trading fees. The calculation of the order cost varies based on different types of futures and prices. PNL is influenced by trading fees, funding fees, and closing PNL. Liquidity consumers, or takers, pay fees equal to the position value multiplied by the taker fee rate. Liquidity providers, or makers, pay fees equal to the position value multiplied by the maker fee rate. Depending on the funding rate and position direction, you will receive or pay funding fees, with the amount equal to the funding rate multiplied by the position value.

Disclaimer: This information does not provide advice on investment, taxation, legal, financial, accounting, or any other related services, nor does it constitute advice to purchase, sell, or hold any assets. MEXC Learn provides information for reference purposes only and does not constitute investment advice. Please ensure you fully understand the risks involved and exercise caution when investing. The platform is not responsible for users' investment decisions.

Market Opportunity

MemeCore Price(M)

$1.05859

$1.05859$1.05859

-6.67%

USD

MemeCore (M) Live Price Chart

Hot Crypto Updates

Microsoft Q4 FY2026 Earnings Preview: Can Azure Growth Justify a $190 Billion AI Bet?

Microsoft will report its fiscal fourth-quarter 2026 earnings after the U.S. market closes on Wednesday, July 29. The earnings call will begin at 2:30 p.m. Pacific Time, or 5:30 p.m. Eastern Time,

Author: James Mitchell

2026-07-28

Fed Meeting This Week: What the July 28 to 29 FOMC Decision Means for Bitcoin and Crypto Prices

Key Takeaways The Federal Reserve meets Tuesday and Wednesday, July 28 to 29, with the rate decision due at 2:00 p.m. ET Wednesday and Chair Kevin Warsh's press conference at 2:30 p.m. Markets price

Author: OoJae

2026-07-27

M80 vs NIP Prediction: BLAST Bounty 2026 CS2 Preview, Maps and Score

M80 and Ninjas in Pyjamas will meet in a best-of-three Counter-Strike 2 series during the opening online stage of BLAST Bounty 2026 Season 2. The match begins on July 21, 2026, at 18:00 Singapore

Author: James Mitchell

2026-07-20

When Is Spain vs Argentina? World Cup 2026 Final Time, Venue and TV Guide

Spain and Argentina will meet in the 2026 FIFA World Cup final on Sunday, July 19, at New York New Jersey Stadium in East Rutherford, New Jersey. Kickoff is scheduled for 3:00 p.m. Eastern Time,

Author: James Mitchell

2026-07-17